Crown T5


| inimum guaranteed power | T5 | |||
|---|---|---|---|---|
| 1 kHz, 0.5% THD | ||||
| Stereo, 4Ω per channel | 750W | |||
| Stereo, 8Ω per channel | 500W | |||
| Bridged mono, 8Ω | 1500W |
| Frequency Response | 20Hz - 20kHz, +0/-1dB |
| Total Harmonic Distortion (THD) | < 0.5%, 20 Hz - 20kHz |
| Intermodulation Distortion | = / < 0.35% (from full rated output to -30dB) |
| Conversion Rate | >10V/us |
| Voltage Gain | 33dB |
| Damping Factor | > 200 (8Ω, 10 Hz - 400 Hz) |
| Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) | > 100 dB |
| Crosstalk | -75dB at 1kHz, -59dB at 20kHz |
| Input Sensitivity | 0.775V or 1.4V (rated power 8Ω) |
| Input Impedance | 20kΩ Balanced, 10kΩ Unbalanced |
| Input Connectors | Balanced XLR and one unbalanced RCA per channel |
| Output Connectors | 4-POLE Speakon® and a pair of binding posts per channel |
| Front Panel Components | Power switch, channel gain control |
| Rear Panel Components | Output mode switch: stereo, parallel, bridge, Input sensitivity switch: 0.775V or 1.4V |
| Power Indicator | Blue and green two-color LED |
| Signal Indicator | One green LED per channel |
| Clip Indicator | One yellow LED per channel |
| Fault Indicator | Red LED per channel , indicating that the channel is closed |
| Power cables | Plug : 10A, 250V, Wire : CCC 3x1.5mm 2 |
| Protection | Protection against short circuit, no load, on / off noise, radio interference protection circuit |
| Ventilation | Air convection mechanism |
| Cooling | Internal air is forced to dissipate heat, fan cooling, rapid adjustment, temperature protection |
| Dimensions (w x h x d) | 19” x 3.46” x 12.45” (482 mm x 88 mm x 316.4 mm) |
| Net Weight | 29.7 lb (13.5 kg) |
| Shipping Weight | 34.2 lb (15.5 kg) |